Wooden floors are preferred by many homeowners. With the availability of a wide range of DIY materials to work with, many homeowners prefer installing the wooden floors on their own instead of relying on a professional contractor. So if you are a DIY enthusiast, or are looking to start your own business installing flooring, here is a complete overview of the best flooring nailer for specific jobs.
Types of Flooring Nailers
While figuring out which flooring nailer to invest in, you will most likely have to make your pick from pneumatic or manual flooring nailers.
Pneumatic flooring nailer– Unless you have a small job, this is the type of nailer you will want to get. These nailers have an operating pressure that ranges between 50 120 PSI. This in turn, makes them much more compatible with the portable versions of the compressors. Another reason why these nailers are widely popular is because they are extremely versatile and they require considerably less manual pressure for driving the nails in. Being pneumatic in nature, all you need to do is exert a slight pressure that will develop a force for several pounds every inch.
Manual Flooring Nailers– These nailers can be a great choice if you do not have an air compressor or are working on a specific site where it isn’t really a good idea to operate an air compressor for longer hours. They have a relatively similar working mechanism like that of the pneumatic nailers. All you need to do is strike the actuator for driving the nails in. Manual nailers, however, require you to put in extra force for driving the nails in. Certain situations also require you to give a couple of strikes more for ensuring that the nail or the staple is perfectly driven to your required depth. You can just grab and go with these nailers. No power source, no hoses, and nothing to connect it to. Just place it on your board and hammer away.
What are the benefits of using flooring nailers?
There are several benefits of using flooring nailers. The largest is that it ensures that the nail is in the perfect angle. To properly secure the flooring to the subfloor the nails should be at the correct angle to ensure it holds the plank tightly to the subfloor as well as the flooring behind it.
When you have a well designed hardwood floor, with absolutely accurate grooves and tongue then the immediate impact of the floor nailer will reduce the requirement of using a crow bar for pulling the individual boards flush against the rest of the flooring.
These nailers also play a vital role in driving the cleats directly into the floor at a super high speed and an accurate direction so that damage to the flooring tongues are considerably reduced. It is possible to install hardwood flooring by drilling the tongues and hand driving nails. It is not only time consuming but also extremely taxing. Using a floor nailer is much quicker, accurate, and far less strenuous.
Most of the high end floor nailers are also compatible with both the staples and the cleat nails. In that case, you wouldn’t have to invest in two different kinds of tools for performing floor installation.
My favorite benefit of a good nailer is that they will greatly reduce the amount of manual effort needed.
What should you look out for while choosing a floor nailer?
While choosing a good floor nailer, there are several factors that you need to consider. Consider these carefully:
Power source– While choosing a floor nailer, you should check the CFM rating and the operating pressure. Likewise, you should also check the power output. Try to understand how much power you will actually need for striking the actuator to drive the staple or the cleat. The lesser it is, the better the results are. At the same time, you should also ensure that the nailer is portable and easy to operate.
The kind of nails or staples that are driven by the tool– While choosing the floor nailer, you should also find out what kind of staples or nails the nailer is compatible with. This will completely depend on the kind of flooring jobs you are currently undertaking or might undertake in the long run. Check the length and the gauge while trying to figure out whether the nailer will be able to drive the generic nails from various manufacturers.
Design of the nailer– Although almost all the flooring nailers have a similar kind of structure, there might be differences in the body and the drive. This greatly affects the entire size the weight of your tool. You should also check the handle of the tool as you will be using it in an upright or bent position. Other than this, you should also check the capacity of the magazine and how easy it is for loading.
So now that you know better about the best flooring nailer, explore your options and make the best pick to simplify your construction work and DIY projects.